| Supplier of winding machines forcoarse yarns |
|
 Twinconer
An individual splicer for each yarn end!
Fully automatic assembly unit, winding two yarn ends directly from spinning bobbins to 10" traverse packages, with electronic yarn clearing. Fully automatic preparation of the spinning bobbins. Semi-link or direct link possible. Improves efficiency during 2f1 twisting with more than 15 % and during tufting with more than 25 % thanks to the individual splicer per spindle. Very high winding speed and adjustable crossing angle thanks to the swivelling arm yarnguiding system. Precision winding available for increased package density and higher efficiency during 2f1 twisting.
 MC-GF
Fully automatic rewinder from spinning bobbins, including electronic yarn clearing, in random or precision winding.
Semi-link or direct link possible.
Perfect package build-up thanks to swivelling arm, which allows also to run very coarse yarns at high speed, even up to Nm 0,4. Splicer per spindle with untwisting of the individual ends, very short splice cycle, quick change of splice chamber and is maintenance free. Equipped with automatic magazines for spinning bobbins up to 700 mm.
Travelling doffing system ATS which consists of one or more travelling doffers carrying an empty cone and a central magazine for empty cones located at the front side of the machine and with 100 cones capacity.
N IDS-HK
Fully automatic hank to cone winder with very accurate length measurement by hysteresis wheel
Hank-to-cone winder for 10" traverse packages. Yarnguiding by swivelling arm with positive yarnguide. Very effective mechanical Anti-Patterning System by changing constantly the number of strokes of the swivelling arm, at constant winding speed. Equipped with driven capstan feeders for elimination of yarn tension differences.
Specially designed compensator bracket with vertical compensator, in combination with a brake plate, to prevent yarn breakage when an entanglement occurs. Equipped with Mono Expanders underneath the spindles or a set of Duo Expanders in front of the machine, with one set holding the hank in operation and a second set in tag-ending. Precision winding available for increased package density.
 Air-Twist module
Twist-effect at speeds between 300 – 1000 m/min.
Adjustable between 50 – 300 rpm.
2 up to 6 ends twisted in 1 single step.
For BCF, CF & Technical yarns.
Inline twisting and heatsetting is possible.
 Dynajet System2
Lowest cost per kg!
Highly efficient, computer-controlled air entangler, entangling up to 1200 m/min, with quick style change.
- 10" traverse, cylindrical (up to diameter 105 mm)
- Yarn guiding by swivelling arm with positive yarn guide.
- Package rotation by driven contact roll, at constant winding speed.
- Standard random winding.
- Production of packages up to 400 mm. (450 mm optional)
- Very effective mechanical Anti-Patterning System by changing constantly the number of strokes of the swivelling arm, at constant winding speed.
- Individual Drive per spindle by motor with frequency inverter, at winding speeds between 250 and 1.200 m/min., depending on the yarn and entangling parameters.
- Gradual start up after each winding stop. The ramp of speed increase is programmable.
Type SO – Standard Overfeed
- For entanglement of coarse final counts (2000 to 30.000 dtex)
- Driven double feeder rolls with double yarn guiding : before and after the entangling.
- Jet box on top of the feeder box.
- Working speeds up to 1.200 m/min. possible, depending on the parameters.
 Type IM – Intermingling
- For intermingling or air-entangling of BCF carpet yarns.
- Generally for final counts up to 10.000 dtex (not absolutely limited).
- Controllable distance between nips in the yarn.
- Working speeds up to 1.200 m/min.
Type AM – Air Mixing
- For mixing BCF and/or CF filament yarns without hard points.
- Water addition possible to reduce friction between the filaments.
- Mostly under high pressure, up to 13 bar.
- Working speed between 250 and 500 m/min., depending on parameters.
 SmarTakeUp
Automatic take-up winder with 24, 36 or 48 spindles. 2 Machineparts, 3-level execution, with 4/6/8 spindles per level, for take-up from GVA-belts or masts, spindle pitch 550 mm.
Winding onto cylindrical or conical packages, 250 mm traverse, max. diameter 410 mm. Winding speed up to 750 m/min.
Six empty tubes in each magazine.
Length measurement per level.
Automatic change of full packages per level.
Driven open-roll system per level.
Complete computer control system + touchscreen and web-interface.
Conveyor belt + photocell per level for evacuation of full packages.
Electronical anti-ribboning system.
Electronic yarndetector per end.
Yarn guiding with linear guiding system.
Separate motor and drive for linear guiding system, open-roll system and package.
Open and closed loop yarntension compensation system.
Standard P-winding. Optional P- and Q-winding selectable just by changing a user parameter.
Very compact machine.
Dimensions per section of 24 spindles :
Height : 1.900 mm - Length : 5.600 mm - Width : 1.675 mm
 N IDDAC
N IDDAC : Take-up winder with indivual accumulator and individual drive per spindle
The number of spindles per installation can vary according to the number of processing lines and the number of ends per processing line with a max. of 48 ends.
Excellent package formation and highest yarn quality thanks to the accumulator and capstan feeder per spindle. Very high process efficiency, up to 99 %. Suitable for all kinds of BCF yarns, especially for undyed nylon.
 BitWinder
Fully automatic residual winder for recuperation of yarn from tufting creels, weaving creels, extrusion and for technical yarn packages.
|
|
|
|
